LT1952EGN-1#TRPBF
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1952 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Voltage - Supply (Vcc/Vdd) | 6.82V~25V |
| Control Features | Enable, Frequency Control |
| Input Voltage (Min) | 6.82V |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 100kHz~500kHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 90% |
| Length | 4.89mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
LT1952EGN-1#TRPBF Overview
With its 16-SSOP (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. It is sufficient to generate 1 outputs with this dc motor controller. There is a Tape & Reel (TR) solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. This dc control operates at 6.82V~25V and has a 6.82V~25V supply voltage. Worked in a -40°C~125°C TJ dc switcher before. The switching controller can be switched at 100kHz~500kHz. The Surface Mount value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at DUAL. The 16 terminations can be used for a wide range of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. 15V nominal DC switcher's voltage input. LT1952 can be searched for other relevant dc to dc converter ics. Switching converter is a special type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 6.82V. The dc to dc regulator can only accept 25V input voltage. The output value is set to the greatest value of 1A.
LT1952EGN-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~500kHz
Enable, Frequency Control
PULSE WIDTH MODULATION
LT1952EGN-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1952EGN-1#TRPBF DC to DC converter applications.
- Smart grid
- USB circuits
- Refrigerators of central air conditioners
- Network technology
- Packaging
- Automatic plug-in machines
- Precision electronic equipment
- Milling machines
- Low output voltage switching power supply circuits
- Medical equipment
