LT1952EGN#PBF
| Parameters | |
|---|---|
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1952 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Voltage - Supply (Vcc/Vdd) | 9.25V~25V |
| Control Features | Enable, Frequency Control |
| Input Voltage (Min) | 9.25V |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 100kHz~500kHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 30 ns |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 90% |
| Length | 4.89mm |
| Width | 3.899mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
LT1952EGN#PBF Overview
As a result of 16-SSOP (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 1 outputs can be generated with the dc motor controller. A solid enclosure of Tube surrounds pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). 9.25V~25V is the operating voltage and supply voltage of the dc control. Qualified to work in an dc switcher with -40°C~125°C TJ. A switching controller such as this can switch at a value of 100kHz~500kHz . The Surface Mount makes it ideal for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Thare switching converters has a terminal (s) at DUAL . A variety of dc switching's functions can be performed on 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. Other relevant dc to dc converter ics can be found by searching "LT1952". In total, switching converter has 16 pins. The type is a particular Switching Regulator or Controllers of switching converter. dc dc voltage regulators should have a minimum input voltage of 9.25V. It should be noted that the dc to dc regulator only accepts 25V voltage as input voltage. 500kHz is the frequency of the switching controller. 1A is the largest value switching converter outputs.
LT1952EGN#PBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~500kHz
Enable, Frequency Control
PULSE WIDTH MODULATION
Frequency: 500kHz
LT1952EGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1952EGN#PBF DC to DC converter applications.
- Motor controller circuits
- Scientific research
- Mobile phones
- Milling machines
- Television equipment
- Series voltage regulation circuits
- Program control systems
- Hydraulic presses
- Low output voltage switching power supply circuits
- Linear guide
