LT1952MPGN-1#PBF
| Parameters | |
|---|---|
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1952 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Voltage - Supply (Vcc/Vdd) | 6.82V~25V |
| Control Features | Enable, Frequency Control |
| Input Voltage (Min) | 6.82V |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~500kHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 90% |
| Length | 4.89mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
LT1952MPGN-1#PBF Overview
It comes in a 16-SSOP (0.154, 3.90mm Width) package, so switching controller can be used for most applications. For outputs of 1, this dc motor controller is suitable. There is a Tube solid enclosure around the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sVoltages 6.82V~25V are the dc control's supply voltage and operating voltage, respectively. Worked in a -55°C~125°C TJ dc switcher before. Using this switching controller, it is possible to switch at 100kHz~500kHz. The Surface Mount makes it ideal for general dc dc regulator. Enable, Frequency Control provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. Different dc switching's functions can be applied to 16 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 15V. In addition to "LT1952", there are other relevant dc to dc converter ics you can find. In particular, switching converter is a type of Switching Regulator or Controllers. An input voltage of 6.82V is the minimum required for the dc dc voltage regulator. The dc to dc regulator can only accept 25V input voltage.
LT1952MPGN-1#PBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~500kHz
Enable, Frequency Control
PULSE WIDTH MODULATION
LT1952MPGN-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1952MPGN-1#PBF DC to DC converter applications.
- Smart grid
- Computer monitoring equipment of building
- Post equipment
- Combined machine tools
- Various precision measuring detectors
- Digital video recorders
- Hydrogen power
- Refrigerators of central air conditioners
- Nuclear power plants
- Experimental setup
