Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
Surface Mount |
YES |
Number of Pins |
7 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
Published |
2000 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - with Nickel (Ni) barrier |
Technology |
BIPOLAR |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
LT1959 |
Function |
Step-Down |
Number of Outputs |
1 |
Voltage - Input (Max) |
15V |
Output Voltage |
2.42V |
Output Type |
Adjustable |
Voltage - Input (Min) |
4.3V |
Input Voltage-Nom |
5V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Output Configuration |
Positive |
Current - Output |
4.5A Switch |
Max Output Voltage |
12.9V |
Voltage - Output (Min/Fixed) |
1.21V |
Topology |
Buck, SEPIC |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
500kHz |
Synchronous Rectifier |
No |
Min Output Voltage |
1.21V |
Width |
8.89mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LT1959IR#PBF Overview
For optimal performance, this voltage regulator uses the Tube package. During the development of this harley voltage regulator, 7 terminations were made. As this regulator voltage is equipped with an analog IC of the type SWITCHING REGULATOR, it is a SWITCHING REGULATOR-type voltage regulator. Space savings are achieved by placing this voltage regulator in the TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package. The voltage regulator is configured with 1 outputs. Adjusting voltage regulator's output pins generate Adjustable output. This switching regulator is designed to fit the Surface Mount mounting system. This voltage regulator 12v should operate at a temperature of -40°C~125°C TJ when operating. Voltage regulator's switching frequency reaches 500kHz. Regulator 4.3V can operate with dc to dc voltage regulator's minimum input voltage 4.3V. As a result, the output voltage of the voltage regulator 12v (Min/Fixed) is 1.21V. As a result of the 4.5A Switch output current, voltage regulator offers maximum flexibility in design. Voltage regulators' input voltage is limited to 15V. A regulator with this 260 peak reflow temperature is essentially indestructible. Voltage regulator is designed to provide a nominal input voltage of 5V to meet the operation requirements. DC/DC regulators of this type are part of the LT1959 family of voltage regulator 12vs. Voltage can be produced at 2.42V volts by voltage regulator. In order to operate voltage regulator, there are 7 pins that must be connected. As a general rule, this voltage regulator 12v should keep its output voltage at least at 1.21V. With a maximum output voltage of 12.9V, DC DC switching regulator has a very high efficiency.
LT1959IR#PBF Features
1 outputs
Peak reflow temperature (Cel) of 260
7 pins
LT1959IR#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1959IR#PBF Voltage Regulators applications.
- Domestic water pumps
- Product burn-in
- ATMs
- Electrical power transmission
- Hydrogen power
- Solar power plants
- Series voltage regulation circuits
- Various precision measuring instruments
- Precision electronic equipment
- Wind power