LT1991CMS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 1.17MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1991 |
| Pin Count | 10 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 130μA |
| Slew Rate | 0.12V/μs |
| Amplifier Type | Programmable Gain |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 2.5nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 21mA |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 110 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 560 kHz |
| Average Bias Current-Max (IIB) | 0.0075μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 25μV |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 560 kHz |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1991CMS#PBF Overview
Packaging for the buffer amplifier is in the form of a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case. An op amp ic of the Programmable Gain type. The op amp is delivered to you in a Tube case. We are approaching the 10h termination of the year. It consists of a total of 10 pins in total. It is important to remember that this op amp should be operated at a voltage of 15V volts. Instrumentation amplifier is a part of Operational Amplifier. 10 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 50μV. This electronic part is recommended for mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureThis op amp can operate from a supply current at 130μA. There are 1 circuits on op amps. On the output type, there are Rail-to-Rail different types of op amps. 1 elements make up the design of this buffer amplifier. The op amp resistance should stay within the range of 1.17MOhm.
LT1991CMS#PBF Features
10 Pins
supply voltage of 15V
Output Type: Rail-to-Rail
Resistance of 1.17MOhm
LT1991CMS#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1991CMS#PBF Instrumentational OP Amps applications.
- PDA
- Strain gauges
- Television broadcasting equipment
- Gaming industry
- Biopotential
- Hand-held batteries
- Fission chambers
- Subtraction operation circuits
- Medical instruments
- Automatic control
