LT1999CMS8-10#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2015 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 20MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1999 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Operating Supply Current | 5.8mA |
| Slew Rate | 3V/μs |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 137.5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 500μV |
| Voltage Gain | 20.04dB |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Supply Voltage Limit-Max | 6V |
| -3db Bandwidth | 2MHz |
| Nominal Gain Bandwidth Product | 2MHz |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
LT1999CMS8-10#PBF Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the Current Sense-type. A Tube case is used for delivering the op amp. In recent months, the number of terminations has approached 8. In this case, there are 8 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are included on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 500μV. This electrical part should be mounted using type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . The buffer amplifier is capable of operating from a supply current of 5.8mA . You should keep the voltage gain at 20.04dB for the time being. On this buffer amplifier, there are 1 circuits. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. The operating supply voltage of the buffer op amp is rated at 5V. Linear amplifier resistance should stay within the range of 20MOhm.
LT1999CMS8-10#PBF Features
8 Pins
supply voltage of 5V
20.04dB voltage gain
Resistance of 20MOhm
LT1999CMS8-10#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1999CMS8-10#PBF Instrumentational OP Amps applications.
- Information processing
- Weak signal detection
- Power generator
- Band-stop filter
- Computer workstations
- Multimedia playback equipment
- Radar
- Logarithmic operation circuits
- pH (acidity)
- Communication device
