LT1999CMS8-20#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Package / Case | MSOP |
| Number of Pins | 8 |
| Resistance | 20MOhm |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 5.8mA |
| Slew Rate | 3 V/μs |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 137.5μA |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 2MHz |
| Voltage Gain | 26.06dB |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| -3db Bandwidth | 2MHz |
| Nominal Gain Bandwidth Product | 2MHz |
| RoHS Status | RoHS Compliant |
LT1999CMS8-20#PBF Overview
In the package, you will find a MSOP-case to contain the op amp ic. An 8-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 500μV. This op amp can operate from a supply current at 5.8mA. Op amp is a member of the 26.06dB's 26.06dB family. There are 1 circuits on op amps. The op amp ic has 1 channels on it. The temperature should not be lower than 0°C for operational amplifier ics to operate. Instrumentation amplifier shouldn't be used above 70°C . It is possible to count 2 elements on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. With regard to the supply voltage, this electrical component is capable of working from under 5.5V. A voltage of 4.5V or higher is recommended for the linear amplifier's supply voltage. It is important to keep the resistance within the 20MOhm range of the linear amplifier.
LT1999CMS8-20#PBF Features
26.06dB voltage gain
Resistance of 20MOhm
LT1999CMS8-20#PBF Applications
There are a lot of Analog Devices, Inc. LT1999CMS8-20#PBF Instrumentational OP Amps applications.
- Television broadcasting equipment
- Radiation thermometry transducers
- Band-pass filter
- Differentiator circuits
- Test and measurement instruments
- Industrial control system
- Non-polarized electrodes
- Inverse/same-phase proportional circuit
- Home audio systems
- Band-stop filter
