banner_page

LT1999CS8-10#PBF

1 Channels 40mA per Channel 137.5μA 120 dB Instrumentational OP Amps 5V SOIC


  • Manufacturer: Analog Devices, Inc.
  • Nocochips NO: 84-LT1999CS8-10#PBF
  • Package: SOIC
  • Datasheet: PDF
  • Stock: 680
  • Description: 1 Channels 40mA per Channel 137.5μA 120 dB Instrumentational OP Amps 5V SOIC(Kg)

Details

Tags

Parameters
Lifecycle Status PRODUCTION (Last Updated: 3 months ago)
Package / Case SOIC
Number of Pins 8
Resistance 20MOhm
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Operating Supply Voltage 5V
Number of Elements 2
Number of Channels 1
Number of Circuits 1
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Operating Supply Current 5.8mA
Slew Rate 3 V/μs
Common Mode Rejection Ratio 120 dB
Current - Input Bias 137.5μA
Output Current per Channel 40mA
Input Offset Voltage (Vos) 500μV
Bandwidth 2MHz
Voltage Gain 20.04dB
Power Supply Rejection Ratio (PSRR) 68dB
-3db Bandwidth 2MHz
Nominal Gain Bandwidth Product 2MHz
Number of Amplifiers 2
REACH SVHC No SVHC
RoHS Status RoHS Compliant

LT1999CS8-10#PBF Overview


In order to protect the op amps, a SOIC case is used. 8 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 500μV. Using an 5.8mA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 20.04dB at all times. During the manufacturing process, this buffer amplifier is divided into 1 circuits. Instrumentation amplifier has 1 channels on it. In order for this buffer op amp to function, it should have a temperature of at least 0°C degrees Celsius. Linear amplifier shouldn't be used above 70°C degrees. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. The operating supply voltage of the buffer op amp is rated at 5V. I would like to point out that this electrical component is capable of working from a voltage below 5.5V as far as the power supply is concerned. It is advised to keep the op amp's supply voltage higher than 4.5V. Linear amplifier resistance should stay within the range of 20MOhm. The buffer amplifier consists of 2 amplifiers.

LT1999CS8-10#PBF Features


20.04dB voltage gain
Resistance of 20MOhm

LT1999CS8-10#PBF Applications


There are a lot of Analog Devices, Inc. LT1999CS8-10#PBF Instrumentational OP Amps applications.

  • Radiation thermometry transducers
  • Differentiator circuits
  • Home audio systems
  • Integrator circuits
  • Vehicle electronics
  • Non-polarized electrodes
  • Information processing
  • Signal amplification
  • Thermocouples
  • Multiplication circuits

Write a review

Note: HTML is not translated!
    Bad           Good