LT1999HMS8-20#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 20MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1999 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Operating Supply Current | 5.8mA |
| Slew Rate | 3V/μs |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 137.5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 2MHz |
| Voltage Gain | 26.06dB |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Supply Voltage Limit-Max | 6V |
| Nominal Gain Bandwidth Product | 2MHz |
| Number of Amplifiers | 2 |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LT1999HMS8-20#PBF Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp ic of the Current Sense type. There is a Tube case that is delivered with the instrumentation amplifiers. There are a total of 8 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. In terms of input offset voltage, operational amplifier rates 500μV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . As long as the supply current of the chip does not exceed 5.8mA, this op amp ic can operate. Maintain 26.06dB as the voltage gain. In total, there are 1 circuits on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. In order for the buffer amplifier resistance to remain within the 20MOhm range, the device should be tested. The linear amplifier has 2 amplifiers.
LT1999HMS8-20#PBF Features
8 Pins
supply voltage of 5V
26.06dB voltage gain
Resistance of 20MOhm
LT1999HMS8-20#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1999HMS8-20#PBF Instrumentational OP Amps applications.
- Polarized electrodes
- Communication device
- High input resistance broadband
- Gaming industry
- Micro signal measurement
- High/low-pass filter circuit
- Television
- Radiation thermometry transducers
- Non-polarized electrodes
- High speed sample
