LT1999HMS8-50#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 20MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1999 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Operating Supply Current | 5.8mA |
| Slew Rate | 3V/μs |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 137.5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 1.2MHz |
| Unity Gain BW-Nom | 1200 kHz |
| Voltage Gain | 34.02dB |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Supply Voltage Limit-Max | 6V |
| Nominal Gain Bandwidth Product | 2MHz |
| Number of Amplifiers | 2 |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LT1999HMS8-50#PBF Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the Current Sense-type. The case in which buffer amplifier is delivered is called a Tube case. There are a total of 8 pins on this op amp. This linear amplifier should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. The buffer op amp includes 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 500μV. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. A supply current of 5.8mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 34.02dB. There are 1 circuits on this op amp. The operating supply voltage of the buffer op amp is rated at 5V. Instrumentation amplifier resistance should remain within the range of 20MOhm. In total, there are 2 op amps on the device.
LT1999HMS8-50#PBF Features
8 Pins
supply voltage of 5V
34.02dB voltage gain
Resistance of 20MOhm
LT1999HMS8-50#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1999HMS8-50#PBF Instrumentational OP Amps applications.
- Video amplifiers
- Gaming industry
- Exponential operation circuits
- pH (acidity)
- Test equipment
- Band-pass filter
- Instrumentation
- Subtraction operation circuits
- Comparator
- Industrial applications including automation
