LT1999HS8-20#PBF
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 20MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1999 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Operating Supply Current | 5.8mA |
| Slew Rate | 3V/μs |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 137.5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Output Current per Channel | 26mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 2MHz |
| Voltage Gain | 26.06dB |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 500μV |
| Nominal Gain Bandwidth Product | 2MHz |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 125°C |
| Number of Amplifiers | 2 |
| Height | 1.752mm |
| Length | 4.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
LT1999HS8-20#PBF Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. An op amp ic of the Current Sense type. A Tube case is used to deliver the buffer op amp. There are a total of 8 pins on this op amp. This linear amplifier should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 1.5mV voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Operational amplifier can operate supply current at 5.8mA. Voltage gain should remain at 26.06dB. On this instrumentation amplifier, there are 1 circuits that are connected together. The operating supply voltage of the buffer op amp is rated at 5V. Op amp resistance should stay within the range of 20MOhm. A linear amplifier such as this has 2 amplifiers on it.
LT1999HS8-20#PBF Features
8 Pins
supply voltage of 5V
26.06dB voltage gain
Resistance of 20MOhm
LT1999HS8-20#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1999HS8-20#PBF Instrumentational OP Amps applications.
- Professional videography
- Power transmission
- Weighing systems
- Video amplifiers
- Portable media players
- Radar
- MP3
- Tablets
- Industrial applications including automation
- Addition operation circuits
