LT1999IMS8-20#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 20MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LT1999 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Operating Supply Current | 5.8mA |
| Nominal Supply Current | 5.8mA |
| Slew Rate | 3V/μs |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 137.5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 2MHz |
| Voltage Gain | 26.06dB |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 500μV |
| Number of Amplifiers | 2 |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LT1999IMS8-20#PBF Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. Buffer amps of this type are called Current Sense-types. Upon delivery, op amp ic is packaged in a Tube case. The total number of pins on linear amplifier is 8. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are located on the operational amplifiers. There is an input offset voltage of 1.5mV for this buffer op amp. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . A supply current of 5.8mA can be used to operate this linear amplifier. 26.06dB should be the voltage gain. The buffer amp consists of 1 circuits in total. The operating supply voltage of the buffer op amp is rated at 5V. Instrumentation amplifier resistance should remain within the range of 20MOhm. As you can see, the linear amplifier has 2 amplifiers.
LT1999IMS8-20#PBF Features
8 Pins
supply voltage of 5V
26.06dB voltage gain
Resistance of 20MOhm
LT1999IMS8-20#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1999IMS8-20#PBF Instrumentational OP Amps applications.
- E-book readers
- Subtraction operation circuits
- Digital cameras
- Signal filtering
- Power transmission
- High speed sample
- Video computer boards
- Car stereo
- Broadcasting
- Image computer boards
