LT1999IS8-20#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 20MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LT1999 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Operating Supply Current | 5.8mA |
| Slew Rate | 3V/μs |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 137.5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 2MHz |
| Voltage Gain | 26.06dB |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Supply Voltage Limit-Max | 6V |
| Nominal Gain Bandwidth Product | 2MHz |
| Number of Amplifiers | 2 |
| Length | 4.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LT1999IS8-20#PBF Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called Current Sense-types. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. Linear amplifier has a total of 8 pins. Please take in mind that op amp should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The op amp ic has an array of 8 pins on it. Op amp ic rates 500μV for input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~85°C. Using a supply current of 5.8mA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 26.06dB at all times. A instrumentation amplifier like this has 1 circuits. The operating supply voltage of the buffer op amp is rated at 5V. It is important that the linear amplifier resistance stays within the range of 20MOhm. A total of 2 instrumentation amplifiers are present on the device.
LT1999IS8-20#PBF Features
8 Pins
supply voltage of 5V
26.06dB voltage gain
Resistance of 20MOhm
LT1999IS8-20#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1999IS8-20#PBF Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Test equipment
- Precision measurement
- Fast A/D and D/A converters
- Car stereo
- Tablets
- Laptop
- Home audio systems
- Hand-held batteries
- Integrator circuits
