LT3003EMSE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3003 |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-G10 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 3V |
| Input Voltage (Min) | 3V |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Output Current-Max | 0.55A |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BUCK-BOOST |
| Current - Output / Channel | 350mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Voltage - Supply (Max) | 40V |
| Voltage - Supply (Min) | 3V |
| Height Seated (Max) | 1.1mm |
| RoHS Status | ROHS3 Compliant |
LT3003EMSE#PBF Overview
To save board space, it uses the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package. It has 3 outputs for LED drivers.We are using Surface Mount as the mounting method.With high efficiency, it appears as a DC DC Regulator.It is capable of working normally at -40°C~125°C TJ.There are considerable benefits for Backlight.For its operation, terminations with a value of 0 are used.Undetermined failures will occur if the voltage supply is less than 3V.There is a base part number LT3003 for this LED driver.10 pins are used on the device.An optimal value of supply voltage is 40V.A circuit operated by the device has 3V volts.When the input voltage is greater than or equal to 3V, the operation of the device is greatly facilitated.By keeping the input voltage below 40V, high stability can be achieved.A current output of 0.55A is not allowed.
LT3003EMSE#PBF Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
LT3003EMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3003EMSE#PBF LED Driver ICs applications.
- Down lights
- Industrial LED Lighting: Image Recognition Devices
- Refrigeration lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED Lightings for Inspection Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Auxiliary lights for on-vehicle cameras
- Stage and Studio lighting
- Replacement lamps
- General lighting
