LT3420EMS-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Photoflash Capacitor Charger |
| HTS Code | 8542.39.00.01 |
| Voltage - Supply | 2.2V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3420 |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-G10 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 16V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Current - Supply | 90μA |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LT3420EMS-1#TRPBF Overview
Tape & Reel (TR) is an acceptable method of shipping the power management.In order to facilitate transportation, it is packaged the power management in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) .The Surface Mount mounting method is universal for easy adaptation.The power management is designed for use with applications at Photoflash Capacitor Charger .A temperature setting of -40°C~85°C is recommended to avoid malfunctions.2.2V~16V voltage is used for the operation of this power management.You can search LT3420 if you are looking for more power ic's pin-to-pin solutions.On the power management, you will find 10 terminals.The instruments designs has received high praise because it is an analog ANALOG CIRCUIT IC.In addition to being supplied by the 3.3V voltage, the power manager is capable of performing many demanding tasks.To use the ics supply, there are 10 pins available.The supply current of the power ic should be conducted at 90μA .In order to start up, it needs at least 2.5V .In addition, you should not supply the power supply ic with a voltage greater than 16V .
LT3420EMS-1#TRPBF Features
Mainly used in Photoflash Capacitor Charger applications
Operating temperature: -40°C~85°C
ANALOG CIRCUIT analog IC
LT3420EMS-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT3420EMS-1#TRPBFPower Management applications.
- Automotive display
- System Thermal for Servers
- Hardware Monitoring for PCs
- Space satellite point of load supply
- HSTL Termination
- Networking Equipment
- In Conjunction With the Internal Feedback E/A of OEM Power Supply Units
- Applications Processors
- Supplement In-Circuit Tester (ICT) Access
- Cluster
