LT3433IFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3433 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 60V |
| Output Voltage | 20V |
| Output Type | Adjustable |
| Max Output Current | 900mA |
| Voltage - Input (Min) | 4V |
| Input Voltage-Nom | 13.8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 500mA Switch |
| Max Output Voltage | 20V |
| Voltage - Output (Min/Fixed) | 3.3V |
| Topology | Buck-Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz |
| Synchronous Rectifier | No |
| Min Output Voltage | 3.3V |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT3433IFE#PBF Overview
For optimal performance, this voltage regulator uses the Tube package. As you can see, this harley voltage regulator contains 16 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. For space-saving purposes, this voltage regulator is available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package. DC DC switching regulator is configured with 1 outputs. On its output pins, this adjusting voltage regulator generates Adjustable output. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. Operating at -40°C~125°C TJ is the recommended temperature for adjusting voltage regulator's operation. Voltage regulator's switching frequency reaches 200kHz. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 3.3V. Featuring a 500mA Switch output current, dc to dc voltage regulator offers maximum design flexibility. Voltage regulators' input voltage is limited to 60V. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 13.8V. I would like to point out that this voltage regulator belongs to the Switching Regulator or Controllers subcategory. This DC/DC regulator belongs to the LT3433 family. The adjusting voltage regulator's output voltage is maintain at 20V. In order to operate voltage regulator, 16 pins are required. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 3.3V. Accordingly, dc to dc voltage regulator's maximum output current is 900mA A. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 20V.
LT3433IFE#PBF Features
1 outputs
Peak reflow temperature (Cel) of 260
16 pins
LT3433IFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3433IFE#PBF Voltage Regulators applications.
- Magnetohydrodynamic power
- Sensitive electronic devices
- Hydraulic presses
- Printing equipment
- ATMs
- PSRR circuits
- Arc suppression circuits
- Pipe bending machines
- Energy management systems
- Computed tomography (CT)
