LT3470HDDB#TRMPBF
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3470 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 40V |
| Output Voltage | 16V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 4V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 200mA |
| Max Output Voltage | 16V |
| Voltage - Output (Min/Fixed) | 1.25V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Control Technique | HYSTERETIC CURRENT MODE |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.25V |
| Length | 3mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
LT3470HDDB#TRMPBF Overview
Using the Tape & Reel (TR) package, this voltage regulator optimizes the performance of the voltage regulator 12v. Throughout this voltage regulator, there are 8 terminations. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. The space-saving 8-WFDFN Exposed Pad package is available for this voltage regulator. 1 outputs of voltage regulator are configured. The adjusting voltage regulator generates Adjustable output. A Surface Mount mounting is required for this switching regulator. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~150°C TJ. A dc to dc voltage regulator's minimum input voltage of 4V is required for this voltage regulator to operate. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 1.25V. A maximum design flexibility is provided by the 200mA output current of voltage regulator. Voltage regulator has an input voltage (Max) of 40V. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. An input voltage of 10V is required for switching regulator operation. There is a subcategory of this regulator voltage called Switching Regulator or Controllers. As part of the LT3470 series of regulators, the voltage regulators can be found. Voltage of voltage regulator can be delivered at 16V volts. The switching regulator operation is carried out by 8 pins. As a general rule, this voltage regulator 12v should keep its output voltage at least at 1.25V. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is 16V, which is the highest available.
LT3470HDDB#TRMPBF Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
LT3470HDDB#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LT3470HDDB#TRMPBF Voltage Regulators applications.
- Printing
- Alternators
- Constant current circuits
- Serial communication converter
- Current source circuits
- Computer monitoring equipment of building
- Surge protection circuits
- Post equipment
- Imported equipment
- Production lines
