LT3480IDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3480 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 36V |
| Output Voltage | 20V |
| Output Type | Adjustable |
| Max Output Current | 2A |
| Voltage - Input (Min) | 3.6V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 20V |
| Voltage - Output (Min/Fixed) | 0.79V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~2.4MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 790mV |
| Height | 750μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
LT3480IDD#PBF Overview
As a result of the use of the Tube package, the performance of this voltage regulator is optimized. A voltage regulator consists of 10 terminations. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. The space-saving 10-WFDFN Exposed Pad package is available for this voltage regulator. The voltage regulator is configured with 1 outputs. On its output pins, this adjusting voltage regulator generates Adjustable output. The voltage regulator 12v fits the Surface Mount mounting hole. Voltage regulators should be operated at -40°C~125°C TJ temperature while operating. This voltage regulator 12v reaches a switching frequency of 200kHz~2.4MHz. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 3.6V. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.79V. There is a voltage regulator maximum input voltage of 36V. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. To meet the switching regulator operation requirements, a nominal input voltage of 10V is provided. This voltage regulator is included in the Switching Regulator or Controllers subcategory. This DC/DC regulator belongs to the LT3480 family. Voltage of voltage regulator can be delivered at 20V volts. 10 pins are used for switching regulator operation. There should be at least a 790mV volt output voltage for this switching regulator in order to make it work properly. A maximum output current of 2A A is available to meet the switching regulator operation requirements. An output voltage of 20V is provided by this regulator voltage.
LT3480IDD#PBF Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
LT3480IDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3480IDD#PBF Voltage Regulators applications.
- Current source circuits
- Automation technology
- Wide-range voltage regulation circuits
- Computer-related products
- Imported equipment
- Telecommunications equipment
- Grinders
- Drilling machines
- Access control systems
- Television equipment
