LT3486EDHC#PBF
| Parameters | |
|---|---|
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Camera Flash |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3486 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 40V |
| Input Voltage-Nom | 3V |
| Max Supply Voltage | 24V |
| Min Supply Voltage | 2.5V |
| Output Current | 1.3A |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Current - Output / Channel | 1.3A Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 2.2MHz |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
LT3486EDHC#PBF Overview
Additionally, there is a 16-WFDFN Exposed Pad package for saving space.As part of the design of this LED driver, there are 2 outputs that have been used.In this case, mounting method is Surface Mount.This emerges as a DC DC Regulator with high efficiency and reliability.-40°C~85°C TJ is a valid operating temperature for the led driver.As a result, Backlight, Camera Flash is likely to benefit greatly.The terminations 16 are designed for its operation.It is configured with 16 pins as its base.There is a base part number LT3486 for this LED driver.The voltage of 24V can be supplied.16 pins are used on the device.Furthermore, it can be classified as Switching Regulator or Controllers based on its characteristics.It operates at a voltage of 2.5V as its minimal input voltage.A minimum supply voltage of 2.5V is required to meet the highest efficiency standards.In terms of supply current, 24V is the maximum value.The load is capable of receiving 1.3A current.This electronic component can fully perform its functions when the switching frequency is kept at 2.2MHz.There is 40V output voltage on this device.When the device is operated, it has 3V volts assigned to it.
LT3486EDHC#PBF Features
Available in the 16-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TJ
Switching frequency of 2.2MHz
Output voltage of 40V
LT3486EDHC#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3486EDHC#PBF LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Gallery lighting
- Constant Voltage Power Source for portable equipment
- LED backlight driver for LCD displays for Tablets and Note PCs
- Industrial LED Lighting: Image Recognition Devices
- Portable lighting
- Refrigeration lighting
- Architectural lighting
- Flicker-free LED Lighting using R1580N
- LED headlights
