LT3486EDHC#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Camera Flash |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 2.2MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3486 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-N16 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 3V |
| Topology | Step-Up (Boost) |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1.3A |
| Control Technique | PULSE WIDTH MODULATION |
| Current - Output / Channel | 1.3A Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Voltage - Supply (Max) | 24V |
| Voltage - Supply (Min) | 2.5V |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LT3486EDHC#TRPBF Overview
There is also a 16-WFDFN Exposed Pad package that is used to save space on the board. LED drivers design with 2 outputs.The mounting method adopted is Surface Mount.It is highly performing and reliable when it emerges as a DC DC Regulator.-40°C~85°C TJ is a valid operating temperature for the led driver.The benefits of Backlight, Camera Flash are considerable.It operates at 2.2MHz frequency.A termination of 16 is used to operate the LED driver.It is likely that undetermined failures will occur if the voltage supply is less than 2.5V.Under the base part number LT3486, you will find this LED driver.In this device, there are 16 pins.This value is designed to support a maximum of 24V.In addition, it can also be categorized into Switching Regulator or Controllers based on its characteristics.Operation of the device requires 3V volts to be applied to the circuit.There should be no more than 1.3A current coming out of the output.
LT3486EDHC#TRPBF Features
Available in the 16-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TJ
Frequency of 2.2MHz
LT3486EDHC#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT3486EDHC#TRPBF LED Driver ICs applications.
- OLED power supply for portable equipment
- Museum lighting
- Portable lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Dimmable LED for vehicle interiors
- General lighting
- LED backlight driver for LCD displays for portable equipment
- Panel lighting
- White LED Backlight for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
