LT3486IFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Camera Flash |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 2.2MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3486 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 36V |
| Input Voltage-Nom | 3V |
| Max Supply Voltage | 24V |
| Min Supply Voltage | 2.5V |
| Output Current | 1.3A |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Current - Output / Channel | 1.3A Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1MHz |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT3486IFE#PBF Overview
16-TSSOP (0.173, 4.40mm Width) Exposed Pad saves board space. In this LED driver, there are 2 outputs.The mounting method adopted is Surface Mount.Initially, it emerges as a DC DC Regulator with high efficiency and a high degree of reliability.-40°C~125°C TJ is a valid operating temperature for the led driver.Backlight, Camera Flash has significant advantages.On the basis of the frequency 2.2MHz, it operates.In order for it to operate, it has 16 terminations.There are 16 pins on the base of this LED driver.Under the base part number LT3486, you'll find this LED driver.It's acceptable for the voltage to be 24V.There are 16 pins on this device.Depending on its characteristics, it is classified into Switching Regulator or Controllers.As its minimal input voltage, it operates at 2.5V.For highest efficiency, it works with a minimal supply voltage of 2.5V.24V is the maximum value of the supply current.There is no current that can be supplied to the load.Electronic components can function properly when their switching frequency is set to 1MHz.This device produces a voltage of 36V as its output.The circuit is assigned 3V volts when the device is in operation.
LT3486IFE#PBF Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 2.2MHz
Switching frequency of 1MHz
Output voltage of 36V
LT3486IFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3486IFE#PBF LED Driver ICs applications.
- Down lights
- Replacement lamps
- LED headlights
- Portable lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- A- lamps
- LED Lighting PFCs, Linear Dimmable
- Street lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Constant Voltage Power Source for portable equipment
