LT3496EUFD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Display Drivers |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 330kHz~2.1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3496 |
| Pin Count | 28 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Output Voltage | 2.04V |
| Power Supplies | 5V |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 3V |
| Output Current | 500mA |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 3V |
| Max Input Voltage | 30V |
| Current - Output / Channel | 1A Switch |
| Internal Switch(s) | Yes |
| fmax-Min | 1.9 MHz |
| Dimming | Analog, PWM |
| Number of Segments | 21 |
| Switching Frequency | 2.1MHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT3496EUFD#PBF Overview
Board space is saved by its 28-WFQFN Exposed Pad package.As part of the design of this LED driver, there are 3 outputs that have been used.Surface Mount is used for mounting.As a result, it appears as a DC DC Regulator with a high efficiency and a high degree of reliability.The LED driver is capable of operating at a temperature of -40°C~125°C TJ.It operates on the basis of the frequency of 330kHz~2.1MHz.28 terminations are used in its operation.It has a base of 28 pins.Segments counted are 21.The base part number for this LED driver is LT3496.30V is a maximum acceptable voltage for the supply.In this device, there are 28 pins.Furthermore, it can be classified as Display Drivers based on its characteristics.This device requires a minimum input voltage of 3V.It works with the minimal supply voltage of 3V to meet highest efficiency standards.Whenever the maximum supply current is allowed, the value reaches 30V.There is no current available to supply to the load.This electronic component can fully perform when the switching frequency is 2.1MHz.2.04V is the voltage at the output terminal.
LT3496EUFD#PBF Features
Available in the 28-WFQFN Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 330kHz~2.1MHz
Supply voltage of 5V
Switching frequency of 2.1MHz
Output voltage of 2.04V
LT3496EUFD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3496EUFD#PBF LED Driver ICs applications.
- Museum lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED backlight driver for LCD displays for Tablets and Note PCs
- Sports Facility Lighting
- Other Electronic Devices
- Auxiliary lights for on-vehicle cameras
- Gallery lighting
- Panel lighting
- LED Lightings for Inspection Devices
