LT3496HUFD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Display Drivers |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 330kHz~2.1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT3496 |
| Pin Count | 28 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Output Voltage | 45V |
| Power Supplies | 5V |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 3V |
| Output Current | 1A |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 3V |
| Max Input Voltage | 30V |
| Current - Output / Channel | 1A Switch |
| Internal Switch(s) | Yes |
| fmax-Min | 1.9 MHz |
| Dimming | Analog, PWM |
| Number of Segments | 21 |
| Switching Frequency | 2.1MHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LT3496HUFD#PBF Overview
28-WFQFN Exposed Pad saves board space. For the design of this LED driver, 3 outputs are used.In order to mount the led light driver, Surface Mount is used.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.The led light driver is capable of working normally at -40°C~125°C TJ.As a result, it operates on the basis of frequency 330kHz~2.1MHz.In this case, the terminations are set to 28.There are 28 pins used to form the base of its configuration.There are estimated to be 21 segments.Under the base part number LT3496, you'll find this LED driver.The supply voltage of 30V is an acceptable maximum value.28 pins are included in it.The Display Drivers is also assigned based on its characteristics.The minimal input voltage is 3V.This system is designed to operate at a minimum voltage of 3V to achieve maximum efficiency.30V is the maximum value of the supply current.There is no current available to supply to the load.Having the switching frequency at 2.1MHz enables this electronic component to perform at its best.This device has a voltage output of 45V volts.
LT3496HUFD#PBF Features
Available in the 28-WFQFN Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 330kHz~2.1MHz
Supply voltage of 5V
Switching frequency of 2.1MHz
Output voltage of 45V
LT3496HUFD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3496HUFD#PBF LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- General lighting
- OLED power supply for portable equipment
- Other Electronic Devices
- LED backlight driver for LCD displays for portable equipment
- Street lighting
- Stage and Studio lighting
- LED headlights
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
