LT3518IFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 250kHz~2.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3518 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 7V |
| Power Supplies | 5V |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 10mA |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 3V |
| Current - Output / Channel | 2.3A Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Number of Segments | 3 |
| Multiplexed Display Capability | NO |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
LT3518IFE#PBF Overview
In order to save board space, the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package is used. Using this LED driver, there are 1 outputs.Surface Mount represents this mounting method.The system emerges as a DC DC Regulator with high efficiency.The led light driver is capable of working normally at -40°C~125°C TJ.The benefits of Backlight are considerable.A frequency of 250kHz~2.5MHz is used to operate it.The operation of this system is supported by 16 terminations.This module has 16 pins as its base.There are estimated to be 3 segments.LED drivers have a base part number of LT3518.The voltage of 30V can be supplied.There are 16 pins on it.Moreover, it can be classified as Display Drivers due to its characteristics.This device requires a minimum voltage of 3V volts.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 3V.A 7V voltage is output by it.
LT3518IFE#PBF Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 250kHz~2.5MHz
Supply voltage of 5V
Output voltage of 7V
LT3518IFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3518IFE#PBF LED Driver ICs applications.
- Medical surgery lighting
- OLED power supply for portable equipment
- Scanners and Handy Terminals
- Stage Lighting and Signage
- Down lighting
- Amusement Machines
- LED Lightings for Industrial Equipment
- Museum lighting
- Flicker-free LED Lighting using R1580N
- Panel lighting
