LT3518IUF#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 250kHz~2.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3518 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Voltage | 7V |
| Power Supplies | 5V |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 10mA |
| Output Current | 1.5A |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 3V |
| Max Input Voltage | 30V |
| Current - Output / Channel | 2.3A Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Number of Segments | 3 |
| Switching Frequency | 2.5MHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LT3518IUF#PBF Overview
16-WQFN Exposed Pad saves board space. These LED drivers have 1 outputs.In this case, mounting method is Surface Mount.With high efficiency, it appears as a DC DC Regulator.-40°C~125°C TJ is the operating temperature and it works fine.There are considerable benefits for Backlight.It operates based on the frequency of 250kHz~2.5MHz.The system operates with a termination of 0.To form its configuration, 16 pins are used.We estimate that there are 3 segments.You can find this LED driver under the base part number LT3518.A maximum supply voltage of 30V is acceptable.On it, there are 16 pins.Further, it can be classified as Display Drivers based on its characteristics.The minimum input voltage for this device is 3V.For maximum efficiency, it requires a minimal supply voltage of 3V.In terms of supply current, 30V is the maximum value.You can supply 1.5A current to the load.As long as the switching frequency is maintained at 2.5MHz, this electronic component is able to perform all of its functions properly.There is 7V output voltage on this device.
LT3518IUF#PBF Features
Available in the 16-WQFN Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 250kHz~2.5MHz
Supply voltage of 5V
Switching frequency of 2.5MHz
Output voltage of 7V
LT3518IUF#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3518IUF#PBF LED Driver ICs applications.
- General lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Street lighting
- Stage Lighting and Signage
- Portable lighting
- Architectural lighting
- Sports Facility Lighting
- High-end retail lighting
- Down lights
- Panel lighting
