LT3519EMS-1#PBF
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Lighting |
| Subcategory | Display Drivers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT3519 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 2V |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 3.5mA |
| Output Current | 500mA |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 3V |
| Max Input Voltage | 30V |
| Current - Output / Channel | 750mA Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Number of Segments | 1 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Length | 4.039mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
LT3519EMS-1#PBF Overview
Save board space with 16-TFSOP (0.118, 3.00mm Width) package. For the design of these LED drivers, 1 outputs are used.To mount, use Surface Mount.With high efficiency, it appears as a DC DC Regulator.At -40°C~125°C TJ, the led driver is capable of operating.It provides considerable benefits for Lighting.16 terminations are designed for its operation.This configuration is built upon 16 pins.There are 1 segments.Surface Mount has been mounted with the device.LT3519 is the base part number for this LED driver.Ideally, the supply voltage should be 30V.There are 16 pins on this device.Furthermore, it can be categorized as Display Drivers based on its characteristics.This device requires a minimum voltage of 3V volts.As a result, it runs at a minimal voltage of 3V in order to achieve the best efficiency.The maximum supply current is 30V.It is possible to supply the load with 500mA current.This electronic component can fully perform its functions when the switching frequency is kept at 1MHz.The output voltage is 2V.
LT3519EMS-1#PBF Features
Available in the 16-TFSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~125°C TJ
Supply voltage of 12V
Switching frequency of 1MHz
Output voltage of 2V
LT3519EMS-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3519EMS-1#PBF LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- OLED power supply for portable equipment
- General lighting
- Architectural lighting
- Constant Voltage Power Source for portable equipment
- Flicker-free LED Lighting using R1580N
- Medical surgery lighting
- Other Electronic Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
- Sports Facility Lighting
