LT3519EMS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Lighting |
| Subcategory | Display Drivers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3519 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Voltage | 45V |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 3.5mA |
| Output Current | 750mA |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 3V |
| Max Input Voltage | 30V |
| Current - Output / Channel | 750mA Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Number of Segments | 1 |
| Switching Frequency | 400kHz |
| Multiplexed Display Capability | NO |
| Length | 4.039mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LT3519EMS#PBF Overview
Save board space with 16-TFSOP (0.118, 3.00mm Width) package. It has 1 outputs for LED drivers.In order to mount the led light driver, Surface Mount is used.When it emerges as a DC DC Regulator, it shows high-performance and reliability.It is possible for the led light driver to operate at a temperature of -40°C~125°C TJ.As a result, Lighting is likely to benefit greatly.It is designed to work with 16 terminations.There are 16 pins on the base of this LED driver.The segment count is 1.The LED driver can be found under the base part number LT3519.It is acceptable for the supply voltage to be 30V.The device has 16 pins.In addition, it can also be categorized into Display Drivers based on its characteristics.This device operates with a minimum input voltage of 3V volts.For maximum efficiency, it requires a minimal supply voltage of 3V.When the maximum supply current is allowed, the value reaches 30V.750mA is the maximum amount of current that can be supplied to the load.This electronic component can fully perform when the switching frequency is 400kHz.It has a voltage of 45V.
LT3519EMS#PBF Features
Available in the 16-TFSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~125°C TJ
Supply voltage of 12V
Switching frequency of 400kHz
Output voltage of 45V
LT3519EMS#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3519EMS#PBF LED Driver ICs applications.
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Portable lighting
- Industrial LED Lighting: Image Recognition Devices
- Gallery lighting
- Refrigeration lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Down lights
- Sports Facility Lighting
- Museum lighting
- White LED Backlight for portable equipment
