LT3590EDC#PBF
| Parameters | |
|---|---|
| Package / Case | DFN |
| Number of Pins | 6 |
| Termination | SMD/SMT |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Frequency | 850kHz |
| Number of Outputs | 1 |
| Efficiency | 91 % |
| Max Output Current | 50mA |
| Interface | Serial |
| Max Supply Voltage | 55V |
| Min Supply Voltage | 4.5V |
| Current - Output | 50mA |
| Max Output Voltage | 48V |
| Voltage - Output | 55V |
| Min Input Voltage | 4.5V |
| Frequency - Switching | 850kHz |
| Max Input Voltage | 55V |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LT3590EDC#PBF Overview
The DFN package saves space on the board. LED drivers use 1 outputs for their design.In the 850kHz frequency range, it operates.This configuration is built upon 6 pins.55V is an acceptable maximum value for the supply voltage.The output voltage is 55V.The input voltage must be minimally 4.5V.A minimal supply voltage of 4.5V is required for it to achieve the highest efficiency.Supply current is limited to 55V at its maximum value.A stable operating temperature of 85°C is required.Stable operation requires a temperature greater than -40°C.When operating with a maximum output current of 50mA, it can deliver all the benefits of a LED driver.It is recommended that the output voltage be no higher than 48V.Make sure the output current is set to 0 for the part.
LT3590EDC#PBF Features
Available in the DFN package
Frequency of 850kHz
LT3590EDC#PBF Applications
There are a lot of Analog Devices, Inc. LT3590EDC#PBF LED Driver ICs applications.
- Panel lighting
- LED headlights
- Flicker-free LED Lighting using R1580N
- Down lighting
- OLED power supply for portable equipment
- Museum lighting
- Dimmable LED for vehicle interiors
- Stage and Studio lighting
- Constant Voltage Power Source for portable equipment
- White LED Backlight for portable equipment
