LT3598EFE#PBF
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 200kHz~2.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3598 |
| Pin Count | 24 |
| Number of Outputs | 6 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 3.2V |
| Output Current | 30mA |
| Voltage - Output | 44V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 3.2V |
| Max Input Voltage | 30V |
| Internal Switch(s) | Yes |
| Low Level Output Current | 2mA |
| Dimming | Analog, PWM |
| Number of Segments | 60 |
| Switching Frequency | 2.5MHz |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Series | True Color PWM™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Display Drivers |
| Technology | BIPOLAR |
LT3598EFE#PBF Overview
24-TSSOP (0.173, 4.40mm Width) Exposed Pad package saves space on the board. A LED driver using this design has 6 outputs.Surface Mount represents this mounting method.With high efficiency, it emerges as a DC DC Regulator.The led light driver is capable of working normally at -40°C~125°C TJ.As a result, it operates on the basis of frequency 200kHz~2.5MHz.In order for it to operate, it has 24 terminations.The base of this board is configured as 24 pins.If the voltage supply is lower than 3V, undetermined failures may occur.A total of 60 segments have been created.This LED driver has the part number LT3598.It is acceptable to operate with a supply voltage of 30V.44V is the output voltage.The device has 24 pins.Additionally, it is categorized into Display Drivers according to its characteristics.With 3.2V as the minimal input voltage, it operates.The system works with a minimum supply voltage of 3.2V in order to achieve maximum efficiency.30V is the maximum value of supply current that can be used.30mA is the maximum amount of current that can be supplied to the load.The electronic component can function fully when the switching frequency is maintained at 2.5MHz.LED drivers from the True Color PWM? series are essential components for a wide variety of products.There are 1 channels for transmission.
LT3598EFE#PBF Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 200kHz~2.5MHz
Supply voltage of 5V
Switching frequency of 2.5MHz
LT3598EFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3598EFE#PBF LED Driver ICs applications.
- Auxiliary lights for on-vehicle cameras
- Architectural lighting
- Industrial LED Lighting: Image Recognition Devices
- Sports Facility Lighting
- Street lighting
- A- lamps
- Gallery lighting
- Flicker-free LED Lighting using R1580N
- Replacement lamps
- LED Lightings for Inspection Devices
