LT3598IUF#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | True Color PWM™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 200kHz~2.5MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT3598 |
| Pin Count | 24 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 3.2V |
| Voltage - Output | 44V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 3.2V |
| Current - Output / Channel | 30mA |
| Internal Switch(s) | Yes |
| Low Level Output Current | 2mA |
| Dimming | Analog, PWM |
| Number of Segments | 60 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
LT3598IUF#TRPBF Overview
To save board space, it uses the 24-WFQFN Exposed Pad package. In LED drivers, the outputs are all set to 6.Mounting is done according to the Surface Mount method.With high efficiency, it emerges as a DC DC Regulator.The led light driver is capable of working normally at -40°C~125°C TJ.It operates at 200kHz~2.5MHz frequency.In this case, it uses 24 terminations.This configuration is built upon 24 pins.Undetermined failures may occur when the voltage supply is less than 3V.The number of segments is estimated to be 60.The LED driver can be found under the base part number LT3598.30V is a maximum acceptable voltage for the supply.44V is the voltage output.24 pins are included in it.According to its characteristics, it is also categorized into Display Drivers.A voltage of 3.2V is its minimal input voltage.It is designed to operate at a minimal voltage of 3.2V to achieve the highest efficiency.There are many applications for this LED driver belonging to the True Color PWM? series.
LT3598IUF#TRPBF Features
Available in the 24-WFQFN Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 200kHz~2.5MHz
Supply voltage of 5V
LT3598IUF#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT3598IUF#TRPBF LED Driver ICs applications.
- Other Electronic Devices
- OLED power supply for portable equipment
- Constant Voltage Power Source for portable equipment
- LED Lighting PFCs, Linear Dimmable
- Replacement lamps
- LED Lightings for Inspection Devices
- Linear fluorescent
- Amusement Machines
- Stage Lighting and Signage
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
