LT3599IFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Display Drivers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 200kHz~2.1MHz |
| Base Part Number | LT3599 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Power Supplies | 5V |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 3V |
| Max Supply Current | 4.8mA |
| Voltage - Output | 44V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 3V |
| Current - Output / Channel | 120mA |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Number of Segments | 40 |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Height | 1.05mm |
| Length | 9.8mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT3599IFE#PBF Overview
The board's 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package saves space. It has 4 outputs for LED drivers.Surface Mount is used to mount the led light driver.DC DC Regulator emerges with high efficiency and reliability.It is possible for the led light driver to operate at a temperature of -40°C~125°C TJ.200kHz~2.1MHz is the frequency in which it operates.In this case, the termination value is 28.This module has 28 pins as its base.If the voltage supply is below 2.7V, undetermined failures may occur.There are 40 segments.The LED driver is based on part number LT3599.It is acceptable for the supply voltage to be 30V.The output voltage is 44V.In addition, it is equipped with a total of 28 pins.Additionally, it can be classified as Display Drivers based on its characteristics.As its minimal input voltage, it operates at 3V.For maximum efficiency, it requires a minimal supply voltage of 3V.As long as the supply current is less than 4.8mA, this device can provide high efficiency.
LT3599IFE#PBF Features
Available in the 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 200kHz~2.1MHz
Supply voltage of 5V
LT3599IFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3599IFE#PBF LED Driver ICs applications.
- Stage Lighting and Signage
- A- lamps
- Panel lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Scanners and Handy Terminals
- LED headlights
- Constant Voltage Power Source for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Sports Facility Lighting
- LED Lighting PFCs, Linear Dimmable
