LT3724IFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE OUTPUT AVAILABLE UPTO 36V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3724 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 36V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | 4V~60V |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck, Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz |
| Input Voltage (Max) | 60V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 225kHz |
| Duty Cycle | 100 % |
| Length | 5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT3724IFE#PBF Overview
Capsuled in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller suits most application needs. For outputs of 1, this dc motor controller is suitable. Packaged in solid enclosures, this pmic has a Tube rating. The system can process Transistor Driver dc switching's outputs (s). A 4V~60V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~125°C TJ dc switcher. There is a switch at 200kHz that can be used with this controller. Surface Mount makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. A switching converters's terminal (s) sits at the DUAL position. 16 terminations with a variety of function. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 20V. LT3724 can be searched for other relevant dc to dc converter ics. The switching converter has a total of 16 pins. Switching converter is a special type of Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 4V. DC regulator outputs 36V voltage based on test statistics. A maximum voltage of 60V is accepted by the dc to dc regulator as an input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 5A. DC regulator225kHz has the maximum frequency. This value is ALSO OPERATES IN ADJUSTABLE OUTPUT AVAILABLE UPTO 36V so that DC to DC voltage regulator better serves the purpose.
LT3724IFE#PBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Enable, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE OUTPUT AVAILABLE UPTO 36V
LT3724IFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3724IFE#PBF DC to DC converter applications.
- Electrical power transmission
- Boring machines
- Hydrogen power
- Scientific testing
- Series voltage regulation circuits
- Energy management systems
- Electrical distribution systems
- Digital precision reference circuits
- Milling machines
- Plate bending machines
