LT3724IFE#TRPBF
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE OUTPUT AVAILABLE UPTO 36V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3724 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 8V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Voltage - Supply (Vcc/Vdd) | 4V~60V |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck, Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.3A |
| Frequency - Switching | 200kHz |
| Input Voltage (Max) | 60V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Length | 5mm |
| Width | 4.4mm |
LT3724IFE#TRPBF Overview
Capsuled in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller can be used for a wide range of applications. For outputs of 1, this dc motor controller is suitable. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. The system can process Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 4V~60V. A -40°C~125°C TJ dc switcher is not a problem. It can switch at 200kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of dc switching's functions can be performed on 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input of 20V. Searching "LT3724" will return other relevant dc to dc converter ics. Switching converter is a type of Switching Regulator or Controllers in particular. It is recommended to use 4V as the minimum input voltage of dc dc voltage regulator. DC regulator outputs 8V voltage based on test statistics. This dc to dc regulator accepts only 60V input voltage at most. For better satisfaction, the value of DC to DC voltage regulator is ALSO OPERATES IN ADJUSTABLE OUTPUT AVAILABLE UPTO 36V. Current is output to the greatest value of 0.3A.
LT3724IFE#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Enable, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE OUTPUT AVAILABLE UPTO 36V
LT3724IFE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT3724IFE#TRPBF DC to DC converter applications.
- Remotely powered electric motors
- Radio equipment
- Series voltage regulation circuits
- Mobile phones
- Constant current circuits
- Product burn-in
- Plate bending machines
- Automatic testing equipment
- Automation technology
- Smoke prevention equipment
