LT3740EDHC#PBF
| Parameters | |
|---|---|
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Clock Sync | No |
| Duty Cycle | 90 % |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 300kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3740 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.25V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 2.2V~22V |
| Control Features | Current Limit, Enable, Power Good |
| Input Voltage (Min) | 2.2V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 22V |
| Control Technique | PULSE WIDTH MODULATION |
LT3740EDHC#PBF Overview
This switching controller fits most application requirements since it is packaged in a 16-WFDFN Exposed Pad package. This dc motor controller can be used to generate outputs with 1 numbers. Packaged in solid enclosures, this pmic has a Tube rating. Transistor Driver dc switching's outputs (s) are supported. The supply and operating voltage of the dc control are 2.2V~22V. Work well in dc switchers with a -40°C~85°C TA. As it has a Surface Mount value, it can be used for general dc dc regulator. Current Limit, Enable, Power Good provides dcdc regulator efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 16. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 5V. Searching "LT3740" will return other relevant dc to dc converter ics. Pins number 16 of switching converter in total. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 2.2V. Based on the test statistics, DC regulator outputs voltage 1.25V. Considering the dc to dc regulator can only accept 22V input voltage, it is important to take note of this. If you are starting a new project, you should note the dc dc regulator's typical output current is 20A. Switching controller operates at 300kHz Hz.
LT3740EDHC#PBF Features
Transistor Driver Outputs
Current Limit, Enable, Power Good
PULSE WIDTH MODULATION
Frequency: 300kHz
LT3740EDHC#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3740EDHC#PBF DC to DC converter applications.
- Fire elevators
- Product testing
- Automatic testing equipment
- Smart grid
- Surface processing equipment
- Machining centers
- Experimental setup
- Computer application technology
- Computer monitoring equipment of building
- Electrical power transmission
