LT3741EFE#PBF
| Parameters | |
|---|---|
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 6V~36V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~1MHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0 TO 34V |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT3741 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
LT3741EFE#PBF Overview
It comes in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package, which makes switching controller suitable for most applications. dc motor controller is suitable for 1 output generation. An enclosure of Tube is used to package the PMIC. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 6V~36V. A -40°C~125°C TJ dc switcher is not a problem. There is a switch at 200kHz~1MHz that can be used with this controller. As it has a Surface Mount value, it can be used for general dc dc regulator. Enable, Frequency Control, Soft Start provides dcdc regulator efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminals (s) are designed at DUAL. A variety of 20 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. You can find other relevant dc to dc converter ics by searching "LT3741". Switching converter is a special type of Switching Regulator or Controllers. An input voltage of 6V is the minimum required for the dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 5V. This dc to dc regulator accepts only 36V input voltage at most. The value of DC to DC voltage regulator is set to ALSO OPERATES IN ADJUSTABLE MODE FROM 0 TO 34V in order to better satisfy the requirement.
LT3741EFE#PBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0 TO 34V
LT3741EFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3741EFE#PBF DC to DC converter applications.
- Elevator lighting
- Flexible manufacturing cells
- Handheld GPS
- Special machining machine tools
- Automation technology
- Computer-related products
- Laboratories
- Nuclear power plants
- Product burn-in
- Milling machines
