LT3741EUF#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0 TO 34V |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LT3741 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 6V~36V |
| Control Features | Enable, Frequency Control, Soft Start |
| Topology | Buck |
| Min Input Voltage | 6V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1.07MHz |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
LT3741EUF#PBF Overview
Capsuled in the 20-WFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. Packaging for the pmic consists of Tube solid enclosures. Transistor Driver dc switching's outputs (s) are supported. dc control's supply and operating voltages are 6V~36V. Suitable for a -40°C~125°C TJ dc switcher. The switching controller is capable of switching at the 200kHz~1MHz position. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. A switching converters's terminal (s) sits at the QUAD position. Various 20 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 12V. Other relevant dc to dc converter ics can be found by searching "LT3741". Total pins of switching converter are 20. Switching converter is a special type of Switching Regulator or Controllers. Statistically, the DC regulator outputs 5V voltage. If you start a project, note down the dc dc regulator's usual output current of 20A. There is a maximum frequency of 1.07MHz for this dc regulators. DC to DC voltage regulator has the value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0 TO 34V to better satisfy the requirement. Voltage 6V must be supplied.
LT3741EUF#PBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0 TO 34V
LT3741EUF#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3741EUF#PBF DC to DC converter applications.
- Power supplies of electronic gadgets
- Sensitive electronic devices
- Direct power supply system
- Emergency lighting monitoring equipment
- Production lines
- Electric heating, lighting
- Industrial controllers
- Pipe bending machines
- Arc suppression circuits
- Adjustable voltage or current linear circuits
