LT3741IFE-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OUTPUT VOLTAGE RANGE 0 VOLT TO 34 VOLT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT3741 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 6V~36V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~1MHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
LT3741IFE-1#TRPBF Overview
It comes in a 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package, so switching controller can be used for most applications. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). With this function, you can deal with Transistor Driver dc switching's outputs (s). 6V~36V is the operating voltage and supply voltage of the dc control. A -40°C~125°C TJ dc switcher is not a problem. There is a switch at 200kHz~1MHz that can be used with this controller. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Enable, Frequency Control, Soft Start which allows efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. DUAL are the position of the terminal of the switching converters. 20 terminations with various dc switching's functions. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. LT3741 can be used to locate other relevant dc to dc converter ics. It is recommended that the input voltage of the dc dc voltage regulator be 6V. Voltages 36V are the maximum that the dc to dc regulator will accept. DC to DC voltage regulator has the value of OUTPUT VOLTAGE RANGE 0 VOLT TO 34 VOLT to better satisfy the requirement.
LT3741IFE-1#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
OUTPUT VOLTAGE RANGE 0 VOLT TO 34 VOLT
LT3741IFE-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT3741IFE-1#TRPBF DC to DC converter applications.
- Access control systems
- Low output voltage switching power supply circuits
- Digital precision reference circuits
- Household control circuits
- Motor controller circuits
- Precision electronic equipment
- Die casting equipment
- Scientific testing
- Computer-related products
- Cutting machine tools
