LT3757EDD#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3757 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 350V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive and Negative |
| Voltage - Supply (Vcc/Vdd) | 2.9V~40V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 2.9V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.02A |
| Frequency - Switching | 100kHz~1MHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT3757EDD#TRPBF Overview
This switching controller fits most application requirements since it is packaged in a 10-WFDFN Exposed Pad package. It is sufficient to generate 1 outputs with this dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 2.9V~40V. A -40°C~125°C TJ dc switcher is not a problem. This switching controller can switch at 100kHz~1MHz. The Surface Mount makes it ideal for general dc dc regulator. To provide efficient switching control, Enable, Frequency Control, Soft Start is included in the dcdc regulator. A SWITCHING REGULATOR analog IC is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of dc switching's functions can be performed on 10 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 24V volts. Other relevant dc to dc converter ics will be returned if you search "LT3757". There are 10 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended that the dc dc voltage regulator's minimum input voltage be 2.9V. Statistically, the DC regulator outputs 350V voltage. It should be fully noted that the dc to dc regulator only accepts 40V input voltage at most. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. It is estimated that this dc regulatorhas a maximum frequency of 1MHz. A value of 0.02A is output as the maximum value of current.
LT3757EDD#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
LT3757EDD#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT3757EDD#TRPBF DC to DC converter applications.
- Correction machines
- USB circuits
- Electric heating, lighting
- Terrestrial set-top boxes
- Balance equipment
- Constant current circuits
- Mobile phones
- Window air conditioners
- Automatic testing equipment
- PSRR circuits
