LT3757EMSE#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3757 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 350V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive and Negative |
| Voltage - Supply (Vcc/Vdd) | 2.9V~40V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 2.9V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.02A |
| Frequency - Switching | 100kHz~1MHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT3757EMSE#TRPBF Overview
It comes in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, so switching controller can be used for most applications. 1 outputs can be generated with the dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 2.9V~40V. Suitable for a -40°C~125°C TJ dc switcher. It can switch at 100kHz~1MHz. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Enable, Frequency Control, Soft Start. An analog IC with the SWITCHING REGULATOR signal is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. Different dc switching's functions can be applied to 10 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input of 24V. LT3757 can be used to locate other relevant dc to dc converter ics. In total, switching converter has 10 pins. Switching converter is a type of Switching Regulator or Controllers in particular. This dc dc voltage regulator should be powered by a voltage of 2.9V. Statistically, the DC regulator outputs 350V voltage. The dc to dc regulator can only accept a maximum input voltage of 40V. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. This dc regulatorhas a max frequency of 1MHz. Whenever the current value is 0.02A, switching converter outputs the highest possible value.
LT3757EMSE#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
LT3757EMSE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT3757EMSE#TRPBF DC to DC converter applications.
- Printing
- Nuclear power plants
- Combined machine tools
- Various precision measuring detectors
- Planers
- Elevator lighting
- ATMs
- Computer-related products
- Solar power plants
- Scientific testing
