LT3757HMSE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3757 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 350V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive and Negative |
| Voltage - Supply (Vcc/Vdd) | 2.9V~40V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 2.9V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~1MHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LT3757HMSE#PBF Overview
As a result of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad compact design, the switching controller is compatible with most applications. The dc motor controller is adquate to generate for 1 outputs. Tube solid enclosure protects the pmic. The system can process Transistor Driver dc switching's outputs (s). A 2.9V~40V voltage is supplied to the dc control and used for operating it. Workable in an dc switcher where -40°C~150°C TJ is the -40°C~150°C TJrm. The switching controller can be switched at 100kHz~1MHz. dc dc regulator is made easier with Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING REGULATOR. There are a terminal (s) on the switching converters that are designed at DUAL. Various 10 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 24V. Other relevant dc to dc converter ics will be returned if you search "LT3757". Total pins of switching converter are 10. Switching converter type is specifically Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 2.9V. A 350V voltage of DC regulator was detected in the test statistics. At most, the dc to dc regulator accepts 40V input voltage. DC switcher's Surface Mount qualifies it for most applications and prototypes. DC regulators have a maximum frequency of 1MHz.
LT3757HMSE#PBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
LT3757HMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3757HMSE#PBF DC to DC converter applications.
- Television equipment
- Computer application technology
- Computed tomography (CT)
- Surface processing equipment
- PSRR circuits
- Printing
- Sink circuits
- Adjustable voltage or current linear circuits
- Imported equipment
- Current source circuits
