LT3757IDD#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3757 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 350V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive and Negative |
| Voltage - Supply (Vcc/Vdd) | 2.9V~40V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 2.9V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.02A |
| Frequency - Switching | 100kHz~1MHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LT3757IDD#TRPBF Overview
In the 10-WFDFN Exposed Pad package, the switching controller meets most application requirements. The dc motor controller is adquate to generate for 1 outputs. There is a Tape & Reel (TR) solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). Voltages 2.9V~40V are the dc control's supply voltage and operating voltage, respectively. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the 100kHz~1MHz position. It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Enable, Frequency Control, Soft Start for efficient switching control. SWITCHING REGULATOR analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 10. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 24V. Other relevant dc to dc converter ics can be found by searching "LT3757". Switching converter has a total of 10 pins. Switching converter is a special type of Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 2.9V. Based on the test statistics, DC regulator outputs voltage 350V. This dc to dc regulator accepts only 40V input voltage at most. DC switcher's Surface Mount qualifies it for most applications and prototypes. The max frequency of the pmic can reach 1MHz. Current is output to the greatest value of 0.02A.
LT3757IDD#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
LT3757IDD#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT3757IDD#TRPBF DC to DC converter applications.
- Various CNC machine tools
- Surge protection circuits
- Low output voltage switching power supply circuits
- Program control systems
- Remotely powered electric motors
- Arc suppression circuits
- Access control systems
- Laboratories
- Special machining machine tools
- Pipe bending machines
