LT3757MPMSE#PBF
| Parameters | |
|---|---|
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3757 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 350V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive and Negative |
| Voltage - Supply (Vcc/Vdd) | 2.9V~40V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 2.9V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~1MHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
LT3757MPMSE#PBF Overview
It comes in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, which makes switching controller suitable for most applications. 1 outputs can be generated with the dc motor controller. The pmic is packaged in Tube solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 2.9V~40V. Suitable for working in an dc switcher that has a -55°C~150°C TJ. A switching controller such as this can switch at a value of 100kHz~1MHz . A generalization of dc dc regulator can be made using Surface Mount. Enable, Frequency Control, Soft Start is used for efficient switching control in the dcdc regulator. A SWITCHING REGULATOR analog integrated circuit is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. 10 terminations with a variety of function. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input of 24V. You can find other relevant dc to dc converter ics by searching "LT3757". Total pins of switching converter are 10. Switching converter is a special type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 2.9V. Based on the test statistics, DC regulator outputs voltage 350V. Considering the dc to dc regulator can only accept 40V input voltage, it is important to take note of this. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. 1MHz is the maximum frequency of this dc regulators.
LT3757MPMSE#PBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
LT3757MPMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3757MPMSE#PBF DC to DC converter applications.
- Low output voltage switching power supply circuits
- Fire elevators
- Boring machines
- Magnetohydrodynamic power
- Linear guide
- Product testing
- Post equipment
- Ball screw pair
- Automatic plug-in machines
- Nuclear power plants
