LT3758AEDD#PBF
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Pitch | 0.5mm |
| Base Part Number | LT3758 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 7.2V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive or Negative, Isolation Capable |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 5.5V~100V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Clock Sync | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
LT3758AEDD#PBF Overview
Capsuled in the 10-WFDFN Exposed Pad package, the switching controller suits most application needs. It is sufficient to generate 1 outputs with this dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. The program can handle Transistor Driver dc switching's outputs (s). A 5.5V~100V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -40°C~125°C TJ rating. Using this switching controller, it is possible to switch at 100kHz~1MHz. The Surface Mount makes it ideal for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Soft Start. A SWITCHING REGULATOR analog integrated circuit is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. The 10 terminations can be used for a wide range of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input of 24V. Searching "LT3758" will return other relevant dc to dc converter ics. There are a total of 10 pins on switching converter. It is recommended to use 5.5V as the minimum input voltage of dc dc voltage regulator. According to the test statistics, DC regulator outputs 7.2V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 25A. The max frequency of the pmic can reach 1MHz.
LT3758AEDD#PBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
LT3758AEDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3758AEDD#PBF DC to DC converter applications.
- Automatic testing equipment
- Network technology
- Geothermal power
- Arc suppression circuits
- PSRR circuits
- Hydro power
- Various CNC machine tools
- Sink circuits
- Industrial robots
- Series voltage regulation circuits
