LT3758AEMSE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Base Part Number | LT3758 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 7.2V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive or Negative, Isolation Capable |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 5.5V~100V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT3758AEMSE#PBF Overview
The switching controller fits in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package and is ideal for most applications. There is sufficient capacity to generate switching controller for outputs 1. Packaged in solid enclosures, this pmic has a Tube rating. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 5.5V~100V. Suitable for a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 100kHz~1MHz. The Surface Mount value makes it suitable for general dc dc regulator. To provide efficient switching control, Enable, Frequency Control, Soft Start is included in the dcdc regulator. A SWITCHING REGULATOR analog integrated circuit is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. An array of 10 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 24V. LT3758 can be searched for other relevant dc to dc converter ics. In total, switching converter has 10 pins. Input voltage of dc dc voltage regulator must be 5.5V. A 7.2V voltage of DC regulator was detected in the test statistics. If you start a project, note down the dc dc regulator's usual output current of 25A. 1MHz is the maximum frequency of this dc regulators.
LT3758AEMSE#PBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
LT3758AEMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3758AEMSE#PBF DC to DC converter applications.
- Large fire protection systems
- Remotely powered electric motors
- Series voltage regulation circuits
- Servo drive system
- Surge protection circuits
- Alternators
- Medical equipment
- Direct power supply system
- Medical monitoring systems
- Radio equipment
