LT3760EFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 100kHz~1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3760 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 6V |
| Nominal Supply Current | 3.5mA |
| Output Current | 100mA |
| Voltage - Output | 6.95V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 6V |
| Max Input Voltage | 40V |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Number of Segments | 45 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Display Mode | BAR GRAPH |
| Height Seated (Max) | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT3760EFE#PBF Overview
Space is saved using its 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package. This LED driver has 8 outputs.Surface Mount is used to mount the led driver.In this case, the result is a DC DC Controller with high efficiency.The led light driver is capable of operating at the operating temperature of -40°C~125°C TJ.Backlight has many benefits.Frequency 100kHz~1MHz is the basis of operation.The system operates with a termination of 0.This LED driver is configured with a base of 28 pins.There are estimated to be 45 segments.LED drivers can be found under the base part number LT3760.40V is a reasonable voltage.This device has an output voltage of 6.95V volts.On it, there are 28 pins.Furthermore, it can be classified as Display Drivers based on its characteristics.A minimal input voltage of 6V is required for it to operate.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 6V.In the event that the maximum supply current is allowed, it reaches 40V.The current that can be supplied to the load is 100mA.The electronic component can fully perform its functions if the switching frequency is maintained at 1MHz.
LT3760EFE#PBF Features
Available in the 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 100kHz~1MHz
Supply voltage of 12V
Switching frequency of 1MHz
LT3760EFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3760EFE#PBF LED Driver ICs applications.
- Replacement lamps
- Architectural lighting
- OLED power supply for portable equipment
- LED backlight driver for LCD displays for portable equipment
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED Lightings for Inspection Devices
- General lighting
- Constant Voltage Power Source for portable equipment
- Gallery lighting
- Refrigeration lighting
