LT3782AIFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT3782 |
| Function | Step-Up |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 72V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | 6V~40V |
| Control Features | Enable, Frequency Control, Reset, Soft Start |
| Input Voltage (Min) | 6V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 154kHz~465kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | SINGLE |
| Max Frequency | 533kHz |
| Max Duty Cycle | 94 % |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
LT3782AIFE#PBF Overview
This switching controller fits most application requirements since it is packaged in a 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package. 2 outputs can be generated with the dc motor controller. An enclosure of Tube is used to package the PMIC. Transistor Driver dc switching's outputs (s) are supported. dc control's supply and operating voltages are 6V~40V. Qualified to work in a -40°C~125°C TJ dc switcher. It can switch at 154kHz~465kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Enable, Frequency Control, Reset, Soft Start is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . An array of 28 terminations of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 13V. Search for "LT3782" to find other relevant dc to dc converter ics. 28 pins are present on switching converter. Switching converter is a special type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 6V. Test statistics indicate DC regulator outputs 72V voltage. This dc to dc regulator accepts only 40V input voltage at most. It's important to remember that the dc dc regulator's normaloutput current is 4A, so you should note it down when starting a new project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 94 %. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. DC regulators have a maximum frequency of 533kHz.
LT3782AIFE#PBF Features
Transistor Driver Outputs
Switching Frequency: 154kHz~465kHz
Enable, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 94 %
LT3782AIFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3782AIFE#PBF DC to DC converter applications.
- USB circuits
- Post equipment
- Milling machines
- Hydro power
- Driver circuits
- Network technology
- Boring machines
- Smoke exhaust equipment
- Digital video recorders
- Alternators
