LT3782EFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3782 |
| Function | Step-Up |
| Number of Outputs | 2 |
| Output Voltage | 10V |
| Output Type | Transistor Driver |
| Max Output Current | 4A |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | 6V~40V |
| Control Features | Enable, Reset, Soft Start |
| Topology | Boost |
| Min Input Voltage | 40V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 154kHz~465kHz |
| Max Input Voltage | 6V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Nominal Input Voltage | 40V |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 533kHz |
| Duty Cycle (Max) | 94% |
| Height | 700μm |
| Length | 4mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LT3782EFE#PBF Overview
This switching controller fits most application requirements since it is packaged in a 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package. 2 outputs are supported by the dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control operates at 6V~40V and has a 6V~40V supply voltage. A -40°C~125°C TJ dc switcher is not a problem. A switching controller such as this can switch at a value of 154kHz~465kHz . dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Enable, Reset, Soft Start which allows efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of terminations with 28 of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 13V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "LT3782". There are a total of 28 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Statistically, DC regulator outputs 10V volts. A starting point for a project is to note down the dc dc regulator's usual output current, which is 4A. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThere is a maximum frequency of 533kHz for this dc regulators. 40V is the nominal working voltage. The maximum input voltage of dc switcher is 6V, so users should limit their voltage accordingly. 40V is the required supply voltage. In this case, the dc switcher won't produce more than 4A watts of output current.
LT3782EFE#PBF Features
Transistor Driver Outputs
Switching Frequency: 154kHz~465kHz
Enable, Reset, Soft Start
PULSE WIDTH MODULATION
LT3782EFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3782EFE#PBF DC to DC converter applications.
- Computer monitoring equipment of building
- SMT equipment
- Power supplies of electronic gadgets
- Hydraulic presses
- Overvoltage protection circuits in TV sets
- Correction machines
- Motor controller circuits
- Digital precision reference circuits
- CNC system
- Cutting machine tools
