LT3782EUFD#PBF
| Parameters | |
|---|---|
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 6V~40V |
| Control Features | Enable, Reset, Soft Start |
| Input Voltage (Min) | 6V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 4A |
| Frequency - Switching | 154kHz~465kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 533kHz |
| Duty Cycle (Max) | 94% |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3782 |
| Function | Step-Up |
LT3782EUFD#PBF Overview
Capsuled in the 28-WFQFN Exposed Pad package, the switching controller suits most application needs. 2 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tube. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 6V~40V voltage is supplied to the dc control and used for operating it. Suitable for a -40°C~125°C TJ dc switcher. Switching can be done at 154kHz~465kHz with this switching controller. As it has a Surface Mount value, it can be used for general dc dc regulator. The dcdc regulator features Enable, Reset, Soft Start for efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Terminal (s) of the switching converters are designed at the QUAD position. An array of 28 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 13V. LT3782 can be searched for other relevant dc to dc converter ics. Switching converter has a total of 28 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 6V. Voltages 40V are the maximum that the dc to dc regulator will accept. DC regulators have a maximum frequency of 533kHz. Switching converter outputs current to the greatest value of 4A.
LT3782EUFD#PBF Features
Transistor Driver Outputs
Switching Frequency: 154kHz~465kHz
Enable, Reset, Soft Start
PULSE WIDTH MODULATION
LT3782EUFD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3782EUFD#PBF DC to DC converter applications.
- Plate bending machines
- Wide-range voltage regulation circuits
- Automatic plug-in machines
- Television equipment
- Computer monitoring equipment of building
- Serial communication converter
- Large fire protection systems
- Low output voltage switching power supply circuits
- Die casting equipment
- Cutting machine tools
