LT3782IFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3782 |
| Function | Step-Up |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 72V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | 6V~40V |
| Control Features | Enable, Reset, Soft Start |
| Input Voltage (Min) | 6V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 154kHz~465kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 533kHz |
| Duty Cycle (Max) | 94% |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT3782IFE#PBF Overview
Capsuled in the 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller can be used for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 2. Packaging for the pmic consists of Tube solid enclosures. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control operates at 6V~40V and has a 6V~40V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. The switching controller can be switched at 154kHz~465kHz. Surface Mount makes it suitable for general dc dc regulator. To provide efficient switching control, Enable, Reset, Soft Start is included in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. switching converters terminal (s) are designed to be at DUAL. 28 terminations with a variety of function. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 13V. A search for "LT3782" will reveal other relevant dc to dc converter ics. There are 28 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended to use 6V as the minimum input voltage of dc dc voltage regulator. According to the test statistics, DC regulator outputs 72V voltage. This dc to dc regulator accepts only 40V input voltage at most. If you start a project, note down the dc dc regulator's usual output current of 4A. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. It is estimated that this dc regulatorhas a maximum frequency of 533kHz.
LT3782IFE#PBF Features
Transistor Driver Outputs
Switching Frequency: 154kHz~465kHz
Enable, Reset, Soft Start
PULSE WIDTH MODULATION
LT3782IFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3782IFE#PBF DC to DC converter applications.
- Computer-related products
- Flaw detection equipment
- Large fire protection systems
- Various precision measuring instruments
- Alternators
- Textile machinery
- Electric water heaters
- Computed tomography (CT)
- Photovoltaic power
- Hydrogen power
