LT3796EFE#PBF
| Parameters | |
|---|---|
| Dimming | Analog, PWM |
| Switching Frequency | 1MHz |
| Voltage - Supply (Min) | 6V |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | True Color PWM™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 100kHz~1MHz |
| Base Part Number | LT3796 |
| Pin Count | 28 |
| Number of Outputs | 1 |
| Output Voltage | 7.7V |
| Input Voltage-Nom | 24V |
| Max Supply Voltage | 100V |
| Min Supply Voltage | 5V |
| Output Current | 10A |
| Topology | SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 24V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
LT3796EFE#PBF Overview
Space is saved using its 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package. LED drivers designed using this technology use 1 outputs.The led driver mounting is done by using Surface Mount.With high efficiency, it appears as a DC DC Controller.It is able to work normally at the operating temperature of -40°C~125°C TJ.As a result, it operates on the basis of frequency 100kHz~1MHz.It operates with 28 terminations.It has a base of 28 pins.It is possible for undetermined failures to occur if the voltage supply falls below 6V.This LED driver can be found under the base part number LT3796.In this case, 100V is acceptable.28 pins are included in it.It works with the minimal supply voltage of 5V to meet highest efficiency standards.A load can be supplied with 10A current.As long as the switching frequency is maintained at 1MHz, this electronic component is able to perform all of its functions properly.A component of the True Color PWM? series, this LED driver is widely used in a variety of applications.A 7.7V voltage is output by it.When using the device, there is a voltage of 24V volts assigned to the circuit.
LT3796EFE#PBF Features
Available in the 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 100kHz~1MHz
Switching frequency of 1MHz
Output voltage of 7.7V
LT3796EFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3796EFE#PBF LED Driver ICs applications.
- Linear fluorescent
- Gallery lighting
- Amusement Machines
- LED Lightings for Industrial Equipment
- Flicker-free LED Lighting using R1580N
- LED Lightings for Inspection Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
- High-end retail lighting
- Panel lighting
- Industrial LED Lighting: Image Recognition Devices
